12/07/2004, 17h46
|
#4
|
Invité
|
Non, mais sérieux, les mecs:
Citation:
Gens features Windowed (Default) and Fullscreen graphics modes, you can swap
between the two by clicking on the Windowed/Fullscreen option in the
Graphics menu or by pressing Alt + Enter on your keyboard. In Fullscreen
mode the menus are replaced by a floating menu which can be accessed by
clicking your right mouse button, all the options in the floating menu are
exactly the same as the Windowed version.
Gens also supports several different Render modes, you may not be able to
use all of them depending on your graphics card and the speed of your
computer, MMX is also required for some modes. You can change the Render
mode by clicking on an option in the Graphics menu or by pressing F11 and
F12 on your keyboard to cycle through the different modes in the following
order.
* * F12* * * * * * * * * * * * * * * * * * * * * * * * * .
* * * |* Normal* * * * * * * * * * (320x240)* * * * * * /|\
* * * |* Double (default)* * * * * (640x480)* * * * * * * |
* * * |* Interpolated* * * * * * * (640x480)* * * * * * * |
* * * |* Scanline* * * * * * * * * (640x480)* * * * * * * |
* * * |* 50% Scanline* * * * * * * (640x480) (MMX Only)* |
* * * |* 25% Scanline* * * * * * * (640x480) (MMX Only)* |
* * * |* Interpolated Scanline* * (640x480)* * * * * * * |
* * * |* Interpolated Scanline 50% (640x480) (MMX Only)* |
* * * |* Interpolated Scanline 25% (640x480) (MMX Only)* |
* * \|/* 2xSaI [Kreed]* * * * * * (640x480) (MMX Only)* |
* * * '* * * * * * * * * * * * * * * * * * * * * * * * * F11* * * * * * * * * *
Windowed and Fullscreen modes use different graphics engines and you will
not always be in the same Render Mode when changing between the two, Gens
will use the last render mode that you used in the current screen mode. For
example if you were using the 2xSai mode in windowed mode and swapped to
fullscreen you would now be in Double mode (or whichever render mode you
last used in fullscreen).
Certain games run with a black bar down either side of the screen which
some people find annoying. You can remove these bars by enabling Stretch
from the graphics menu (or pressing Shift + F2). Please note that the
Stretch option is not available in all Render Modes.
One additional "mode" is only available through a keyboard shortcut,
pressing Shift + F9 whilst in Fullscreen "Normal" and "Double" render modes
will activate "Force software blit". This isn't necessary for most computers
but you can try it if you are experiencing low frame rates in Fullscreen
modes on slower computers.
|
Moralité: appuie sur F12 jusqu'à avoir le mode 2cxSAI en full screen...
|
|
|