[Video]
Essayez de rentrer ces paramètres dans le fichier mugen.cfg.
;Enter the width and height of the resolution you want to set here.
;The optimal resolution is 320x240, but if your video card has problems
;You may want to try 640x480.
Width = 640
Height = 480
;This is the color depth at which to run MUGEN. You should set it to
;16 bit color unless your video card has problems with it.
;16-fastest, 24,32-slower, 8-slowest/worst
Depth = 8
;Set this parameter to 0 to disable screen stretching, and set it to 1 if
;you want to scale it up to fit the current resolution.
Stretch = 1
;Set this parameter to use a resolution-doubling filter. You will
;need a fast machine to use these filters. You will need to increase
;the screen resolution to at least 640x480 for these modes.
;0 - off
;1 - diagonal edge detection
;2 - bilinear filtering
;3 - horizontal scanlines
DoubleRes = 0
;Choose from "1" for VESA1, or "Linear" and "Banked" for VESA2
;Note: VESA1 is very slow on certain video cards, especially the newer
;ones. "Linear" is usually the fastest for new cards.
efault is "Linear".
Vesamode = Linear
;Set to 1 to enable vertical retrace synchronization.
VRetrace = 0
Quelquefois en baissant le chiffre de la ligne Depth de 16 à 8,mugen peu passer